Beam and pier shimming
Beam and pier shimming is the practice of inserting thin, tapered pieces of material, called shims, between a foundation pier and the beam it supports to raise or level the structure above. It is a common way to correct sagging or uneven floors in pier-and-beam homes.
Shims are thin, tapered wedges, usually made of steel or treated wood, that get driven into the gap between a pier (the concrete or masonry post set in the ground) and the beam resting on it. Each shim adds a small amount of lift, so a crew can bring a sagging section of floor back toward level without rebuilding the framing.
The method matters because pier-and-beam homes, which are common across the Austin area, rest on a grid of piers rather than a continuous slab. Over time, piers can settle, shift, or lose contact with the beam, and the floor above follows. Shimming addresses that gap directly, which is why it shows up so often in local foundation work.
Shimming is usually done in small increments. Raising a beam too quickly can crack drywall, pull doors out of square, or stress the rest of the house, so the work is typically spread over time and checked against a level. Some piers also need to be stabilized or replaced before shims will hold, since shims only help if the pier underneath is solid.
If you are looking for firms that handle this kind of work, the pier and beam repair providers in this directory are a good starting point.