Austin Foundation Repair Directory
Menu

Foundation repair companies glossary

Short, plain-English definitions of the terms you'll meet when choosing a Foundation Repair provider in Austin Area.

Beam and pier shimming
Beam and pier shimming is the practice of inserting thin, tapered pieces of material, called shims, between a foundation pier and the beam it supports to raise or level the structure above. It is a common way to correct sagging or uneven floors in pier-and-beam homes.
Bell bottom piers
Bell bottom piers are drilled concrete piers with an enlarged, bell-shaped base that transfers a building's load to firm soil or rock well below the surface. They are also called belled piers or drilled shaft piers.
Concrete cylinder piers
Concrete cylinder piers are precast concrete tubes stacked vertically beneath a foundation, driven or set to bear on deeper, stable soil. They are a common underpinning method for sinking or settling slabs and footings.
Crawl space encapsulation
Crawl space encapsulation is the process of sealing a crawl space with a heavy-duty liner on the floor and walls, and often sealing vents, so that ground moisture and outside air stay out. It isolates the space from the rest of the building's ground-level environment.
Differential settlement
Differential settlement is the uneven sinking of different parts of a foundation, so one section drops relative to another. It is a common cause of cracked walls, sticking doors, and racked framing.
Expansive clay soil
Expansive clay soil is clay that takes on water and swells, then loses moisture and shrinks, repeatedly moving the ground beneath a structure. In Central Texas, this seasonal movement is a common reason slab foundations crack and shift.
Floor joist
A floor joist is a horizontal framing member that supports a floor's subfloor and finish flooring and spans between beams, girders, or foundation walls. Sistering, which attaches a new board alongside a damaged one, is a common way to reinforce a joist.
Foundation heave
Foundation heave is the upward movement of a slab or footing caused by underlying soil swelling as it takes on moisture. It is the opposite of settlement, where a foundation sinks as soil compresses or dries out.
Foundation settlement
Foundation settlement is the downward movement of a building's foundation as the soil beneath it compresses, consolidates, or shifts. Uniform settlement sinks the whole structure evenly, while differential settlement sinks one part more than another and is the type that usually causes damage.
Helical piers
Helical piers are steel shafts fitted with screw-like helix plates that are rotated into the soil until they reach stable load-bearing ground. They are attached to a foundation to support it and stop further settling.
Hydraulic piering
Hydraulic piering is a foundation repair method in which hydraulic jacks push steel pier columns into the soil beneath a structure and then raise the foundation back toward its original level. It is used to stabilize and lift sinking or settling foundations.
Hydrostatic pressure
Hydrostatic pressure is the force that water held in saturated soil exerts against foundation walls and slabs. It builds as the soil around a foundation fills with water and has nowhere to drain.
Pier and beam foundation
A pier and beam foundation raises a house on a framework of wood beams and joists that rest on concrete or masonry piers, leaving a crawl space between the floor and the ground. It is a common foundation style in older Austin-area homes.
Polyurethane foam leveling
Polyurethane foam leveling is a concrete lifting method in which technicians drill small holes in a sunken slab and inject high-density expanding polyurethane foam beneath it to raise the surface back to level. It is also called polyjacking.
Post-tension slab
A post-tension slab is a concrete foundation slab reinforced with high-strength steel tendons that are stretched and anchored after the concrete has been poured and cured. The tension compresses the slab, helping it resist cracking as the soil beneath it shifts.
Slab-on-grade foundation
A slab-on-grade foundation is a single concrete slab poured directly on prepared soil, with thickened edges called beams that carry the load of the walls. It sits at ground level, unlike a raised foundation that holds the house on piers or a crawl space.
Steel push piers
Steel push piers are steel tube sections driven hydraulically into load-bearing soil or rock, using the weight of the structure as the resistance that pushes each section down. They are used to stabilize and lift settling foundations.
Sump pump
A sump pump is an electric pump set in a pit, called a sump basin, at the lowest point of a basement or crawl space. It switches on when water collects and pushes that water out through a discharge pipe away from the foundation.
Underpinning
Underpinning is a foundation repair method that extends or strengthens an existing foundation's support by transferring its load to deeper or more stable soil. It is used when the original footing sits on soil that is too weak, shifting, or too shallow to carry the structure safely.
Vapor barrier
A vapor barrier is a sheet of plastic, usually polyethylene, laid over the soil floor of a crawl space to slow the upward movement of ground moisture into the air above. It helps keep a crawl space drier, which protects wood framing, insulation, and the foundation.
What is a French drain?
A French drain is a gravel-filled trench containing a perforated pipe that collects and redirects groundwater and surface water away from a building's foundation. It relieves soil pressure and keeps moisture from pooling against the footings and walls.
What is mudjacking?
Mudjacking is a concrete leveling method that pumps a cement and soil slurry through small holes drilled into a sunken slab to lift it back to level. It is used on driveways, sidewalks, patios, and garage floors where the ground beneath has settled.
What is sistering?
Sistering is a repair method in which a new board is bolted or nailed alongside a damaged or weakened joist to share its load and restore strength. The original member stays in place and the new piece runs beside it.
What is slabjacking?
Slabjacking is the general term for raising settled concrete slabs, such as driveways, sidewalks, patios, and garage floors, by pumping a fill material through small holes drilled into the slab to fill the void underneath. Mudjacking and polyurethane foam injection are the two most common methods used to do it.