Hydraulic piering
Hydraulic piering is a foundation repair method in which hydraulic jacks push steel pier columns into the soil beneath a structure and then raise the foundation back toward its original level. It is used to stabilize and lift sinking or settling foundations.
Hydraulic piering is a foundation repair method that uses hydraulic jacks to drive steel pier columns down to load-bearing soil and then lift the structure on those columns. The piers, often steel pipe sections, are advanced one at a time beneath the footing or beam. Once the piers reach firm ground, the jacks transfer the weight of the house onto them, and the foundation can be raised in measured steps toward its original position.
The method matters most where soil moves. Across the Austin area, expansive clay swells when wet and shrinks when dry, and that cycle can leave slab or pier-and-beam foundations sloping, cracked, or out of level. Hydraulic piering addresses the underlying problem, which is support, rather than only patching the visible damage. Because the jacks work with hydraulic pressure, the crew can monitor the lift as it happens and stop once the structure is back in a safe range.
Homeowners and contractors often compare hydraulic piering with other pier systems and with grouting or soil stabilization. The term itself refers only to the use of hydraulic jacking on pier columns. If you are looking for businesses that perform this work, the slab foundation repair providers listed in this directory are a place to start.
"