Polyurethane foam leveling
Polyurethane foam leveling is a concrete lifting method in which technicians drill small holes in a sunken slab and inject high-density expanding polyurethane foam beneath it to raise the surface back to level. It is also called polyjacking.
Polyurethane foam leveling is a way of raising concrete that has settled, sunk, or pulled away from its base. A technician drills holes about the size of a quarter through the slab, then pumps a two-part polyurethane material into the void underneath. The liquid expands quickly into a dense, rigid foam that fills gaps and pushes the slab upward. Because the holes are small, the work usually leaves little disturbance on the surface.
The method is often called polyjacking, and it is one of the main alternatives to traditional mudjacking, which uses a slurry of soil and cement. Foam is lighter than slurry, so it adds less weight to soft soil that may have caused the sinking in the first place. It also cures fast, so the slab can typically take foot traffic again sooner.
Polyurethane foam leveling matters most for driveways, sidewalks, patios, pool decks, and garage slabs that have dropped at the joints, creating trip hazards or pooling water. In the Austin area, where expansive clay soils shift with wet and dry seasons, settling slabs are a common problem, which is why this process comes up often in foundation repair work. Lifting a slab does not address the cause of the movement on its own, so a provider will usually check drainage and soil conditions as part of the job.
If you need a provider, the concrete leveling and mudjacking category in this directory lists businesses that offer this service and related lifting methods.
}