What is mudjacking?
Mudjacking is a concrete leveling method that pumps a cement and soil slurry through small holes drilled into a sunken slab to lift it back to level. It is used on driveways, sidewalks, patios, and garage floors where the ground beneath has settled.
Mudjacking is a method of raising a sunken concrete slab by pumping a slurry of cement, soil, and water into the void beneath it. A crew drills small holes, usually a couple of inches across, through the slab at the low spots. The slurry is forced under pressure through those holes, filling the empty space and pushing the slab upward until it sits level again.
The problem it solves is settlement. When soil under a driveway, sidewalk, patio, or garage floor washes out, compacts, or dries and shrinks, the concrete above loses its support and drops. Cracks, trip hazards, and water pooling against the house often follow. Mudjacking addresses the sag without tearing out the slab, which is why it is common in older neighborhoods around Austin where long runs of concrete have settled over decades.
The technique is sometimes called slab jacking or concrete leveling, and newer methods such as polyurethane foam injection do a similar job with a different material. Mudjacking remains a standard option for large flat surfaces because the slurry is inexpensive relative to replacement and cures in place. Crews typically check the slab with a level as they work so they can stop once the surface is even.
If you need a provider for this work in the Austin area, the concrete leveling and mudjacking category lists local businesses that offer it.
"